|Our Brightest Featherweight Performer Yet
Despite its light 3.3 kg (7.3 lbs.)*1 weight and compact dimensions, the PT-VW350 outputs a spectacular 4,000 lm*2 of brightness for bright, clear, and color-saturated images even in well-lit rooms.
*1 PT-VW350/VX420: Approx. 3.3 kg (7.3 lbs.).
High 10,000:1 Contrast*
A new iris mechanism optimizes light output according to content. Blacks are deep and rich while colors and highlights are reproduced with realism.
* With Lamp Power set to Normal and Iris set to ON.
7,000 hrs. Maintenance-free*
When used for eight hours per day, lamp and filter replacement is not required for up to four years (or 7,000 hours* of operation), significantly reducing total cost of ownership.
* This is the maximum value when the lamp power is set to ECO, with the lamp turned on for 3 hours and off for 0.5 hour. Increases in the lamp on cycle or extended use with the lamp continuously turned on will reduce lamp replacement cycle. With lamp power is set to Normal, lamp replacement cycle is 5,000 hours. Usage environment affects lamp and filter replacement cycle.
Daylight View Basic
Panasonic’s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark areas of the image, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and Daylight View Basic function adjusts halftone color and brightness levels according to the surrounding illumination.
The quiet design keeps noise levels down to a low 29 dB on Eco Mode with the cooling
fan hardly audible, minimizing distractions during presentations.
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
Low Power Consumption on Standby
With Standby Mode set to Eco,* standby power consumption is a mere 0.5 W. This lowers running costs and helps to reduce environment impact.
* When Standby Mode is set to ECO, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal